Bitmain · SHA-256 · Rudari BTC
Cene gostovanja z vsem vključenim za ta stroj z 5,054 W in dobiček, ki ostane pri današnjem prihodku. Vprašajte ponudnika, ali lokacija sprejema stroje z vodnim ali potopnim hlajenjem.
Kalkulator iz našega brezplačnega pripomočka: po njem se računa vsako povračilo na tej strani.
Dobiček in povračilo sta oceni na podlagi današnjih cen kovancev in težavnosti omrežja, pred provizijami poola, gostovanjem in davki. Spreminjata se vsak dan. To ni finančni nasvet.
Dodajte ta kalkulator na svojo stran →| Obdobje | Prihodek | Elektrika | Dobiček |
|---|---|---|---|
| Dan | $9.73 | −$4.42 | $5.31 |
| Teden | $68.09 | −$30.91 | $37.19 |
| Mesec | $291.82 | −$132.46 | $159.37 |
| Leto | $3,550 | −$1,612 | $1,939 |
Prihodek in strošek elektrike · 121.3 kWh na dan · pri današnji ceni in težavnosti BTC
Vsi kovanci, ki jih ta naprava lahko rudari, po današnjih cenah in težavnosti · $0.0364/kWh
| Kovanec | Narudarjeno na dan | Prihodek / dan | Dobiček |
|---|---|---|---|
 PPC |
110 PPC | $33.07 | $28.66 |
 BC2 |
123 BC2 | $12.51 | $8.10 |
 XEC |
1,573,627 XEC | $10.51 | $6.10 |
 BSV |
0.55 BSV | $9.98 | $5.56 |
 BTC Ocenjeno na |
0.00012 BTC | $9.73 | $5.31 |
 BCH |
0.0315 BCH | $9.12 | $4.70 |
| BCH2 | 318 BCH2 | $7.95 | $3.53 |
 FB |
11.6 FB | $4.22 | −$0.19 |
Lestvice uporabljajo glavni kovanec algoritma (BTC za SHA-256, LTC + DOGE za Scrypt): majhne stranske verige danes morda plačajo več na hash, a ne morejo sprejeti veliko hashrata.
━ Povprečna cena ━ Najnižja cena
Bitmain Antminer S19 XP+ Hyd (266Th) je ASIC rudar podjetja Bitmain za algoritem SHA-256, s 266 TH/s pri 5,054 W. Datum izida: januar 2025. Njegova učinkovitost 19.0 J/TH je blizu mediane rudarjev SHA-256, ki jih spremljamo (20.4 J/TH). Pri $0.036/kWh je po dnevnem dobičku na 94. mestu od 299 rudarjev SHA-256 in zasluži približno $5.31 na dan z rudarjenjem BTC. Najboljša cena na AsicProfit je $2,961. Po današnjih podatkih bi se povrnil v približno 558 dneh. Hlajen je z vodo (hydro), zato namesto ventilatorjev potrebuje hladilni krog in suhi hladilnik.
Vprašajte o tem rudarju. Preverjeni računi sprašujejo in odgovarjajo, prodajalci odgovarjajo v imenu trgovine, vsaka objava pa je pred prikazom preverjena.
Oleh B. · 21. okt. 2026 · o drugi različici
how often do I have to check the coolant on a hydro miner
AsicProfit Support AsicProfit · 22. okt. 2026
Bitmain's guide puts pH at the centre of routine checks and says coolant below pH 7 should not be used. Test pH roughly every six months, track freezing point and conductivity, and do a full coolant check at least once a year. When draining for repair, empty the miner completely.
Sophie M. · 20. okt. 2026 · o drugi različici
Is there warranty on a used S19 XP+ Hyd?
AsicProfit Support AsicProfit · 21. okt. 2026
Bitmain's standard warranty for new S19 and later miners is 365 days from the official shipment date, subject to the sales contract, and is tied to the serial number. A used unit keeps whatever is left of that period. Check the serial on Bitmain's warranty check page before buying. Out of warranty units can still be repaired for a fee.
Milan P. · 16. okt. 2026 · o drugi različici
do I need a full cooling container or can I run one at home with a dry cooler
AsicProfit Support AsicProfit · 17. okt. 2026
Bitmain designs it to run with its own hydro cooling infrastructure, but what the miner needs is the flow, pressure, temperature and fluid quality in its spec. A home loop with a pump, dry cooler and plate heat exchanger can meet that if sized for over 5 kW of heat per unit, plus three phase power. Most owners use a hosting site.
Tomas N. · 13. okt. 2026 · o drugi različici
What coolant, flow and pressure does the XP+ Hyd need?
AsicProfit Support AsicProfit · 14. okt. 2026
Bitmain lists 8 to 10 litres per minute per unit, pressure up to 3.5 bar, inlet coolant 20 to 50°C, and OD10 pipe connectors. Approved fluids are antifreeze (pH 7.0 to 9.0), pure water (6.5 to 7.5) or deionized water (8.5 to 9.5). Use a glycol mix rated for the lowest temperature on site, since frozen and cracked heat exchangers are not covered.
Katarina H. · 11. okt. 2026 · o drugi različici
Can I plug an S19 XP+ Hyd into normal single phase power?
AsicProfit Support AsicProfit · 11. okt. 2026
No. Bitmain specifies three phase 380 to 415 V, 50 or 60 Hz, up to 12 A per phase, through an APW11 power supply with a waterproof connector. The power cord is not included. Bitmain also requires an earthed supply, a surge protection device and a disconnect that cuts all three phases at once. Plan the electrical work with a qualified electrician.
Daniel F. · 13. sep. 2026 · o drugi različici
What is the actual difference between the 279T and 293T versions?
AsicProfit Support AsicProfit · 14. sep. 2026
They are the same machine in different bins. Bitmain lists 279 TH/s at about 5,301 W and 293 TH/s at about 5,567 W, both around 19 J/TH at 35°C coolant inlet. The 293T makes more hashrate and needs more power and cooling capacity per unit. Compare both in the calculator at your power price.
Prijavite se s preverjenim računom, da zastavite vprašanje. Prijava
| Model | Hashrate | Moč | Dobiček |
|---|---|---|---|
| Bitmain Antminer S21e Hyd (310Th) | 310 TH/s | $6.73 | |
| Bitmain Antminer S21e Hyd (288Th) | 288 TH/s | $6.25 | |
| Bitmain Antminer S19 XP+ Hyd (293Th) | 293 TH/s | $5.85 | |
| Bitmain Antminer S19 XP+ Hyd (279Th) | 279 TH/s | $5.57 | |
| Bitmain Antminer S19 XP Hyd (257Th) | 257 TH/s | $4.73 | |
| Bitmain Antminer T19 Pro Hyd (235Th) | 235 TH/s | $4.08 |
NMC
QUAI