Bitmain · SHA-256 · Rudari BTC
Hosting cijene sa svime uključenim za ovaj stroj od 5,054 W i dobit koja ostaje uz današnju zaradu. Pitajte hosting jesu li na lokaciji prihvaćeni strojevi s vodenim ili imerzijskim hlađenjem.
Kalkulator iz našeg besplatnog widgeta: prema njemu se računa svaki povrat na ovoj stranici.
Zarada i povrat su procjene prema današnjim cijenama kovanica i težini mreže, prije naknada poola, hostinga i poreza. Mijenjaju se svaki dan. Nije financijski savjet.
Postavite ovaj kalkulator na svoju stranicu →| Razdoblje | Prihod | Struja | Zarada |
|---|---|---|---|
| Dan | $9.73 | −$4.42 | $5.31 |
| Tjedan | $68.09 | −$30.91 | $37.19 |
| Mjesec | $291.82 | −$132.46 | $159.37 |
| Godina | $3,550 | −$1,612 | $1,939 |
Prihod i trošak struje · 121.3 kWh dnevno · uz današnju cijenu i težinu BTC
Sve kovanice koje ovaj miner može rudariti, po današnjim cijenama i težini · $0.0364/kWh
| Kovanica | Izrudareno dnevno | Prihod / dan | Zarada |
|---|---|---|---|
 PPC |
110 PPC | $33.07 | $28.66 |
 BC2 |
123 BC2 | $12.51 | $8.10 |
 XEC |
1,573,627 XEC | $10.51 | $6.10 |
 BSV |
0.55 BSV | $9.98 | $5.56 |
 BTC Rangirano prema |
0.00012 BTC | $9.73 | $5.31 |
 BCH |
0.0315 BCH | $9.12 | $4.70 |
| BCH2 | 318 BCH2 | $7.95 | $3.53 |
 FB |
11.6 FB | $4.22 | −$0.19 |
Ljestvice koriste glavnu kovanicu algoritma (BTC za SHA-256, LTC + DOGE za Scrypt): male sporedne mreže danas mogu plaćati više po hashu, ali ne mogu primiti mnogo hashratea.
━ Prosječna cijena ━ Najniža cijena
Bitmain Antminer S19 XP+ Hyd (266Th) je ASIC rudar tvrtke Bitmain za algoritam SHA-256, s 266 TH/s pri 5,054 W. Datum izlaska: siječanj 2025.. Njegova učinkovitost od 19.0 J/TH blizu je medijana SHA-256 rudara koje pratimo (20.4 J/TH). Pri $0.036/kWh je 94. od 299 SHA-256 rudara po dnevnoj zaradi i zarađuje oko $5.31 dnevno rudareći BTC. Najbolja cijena na AsicProfitu je $2,961. Po današnjim brojkama isplatio bi se za oko 558 dana. Hladi se vodom (hydro), pa umjesto ventilatora treba rashladni krug i suhi hladnjak.
Pitajte o ovom mineru. Provjereni računi pitaju i odgovaraju, prodavači odgovaraju u ime svoje trgovine, a svaka objava se provjerava prije prikaza.
Oleh B. · 21. lis 2026. · o drugoj verziji
how often do I have to check the coolant on a hydro miner
AsicProfit Support AsicProfit · 22. lis 2026.
Bitmain's guide puts pH at the centre of routine checks and says coolant below pH 7 should not be used. Test pH roughly every six months, track freezing point and conductivity, and do a full coolant check at least once a year. When draining for repair, empty the miner completely.
Sophie M. · 20. lis 2026. · o drugoj verziji
Is there warranty on a used S19 XP+ Hyd?
AsicProfit Support AsicProfit · 21. lis 2026.
Bitmain's standard warranty for new S19 and later miners is 365 days from the official shipment date, subject to the sales contract, and is tied to the serial number. A used unit keeps whatever is left of that period. Check the serial on Bitmain's warranty check page before buying. Out of warranty units can still be repaired for a fee.
Milan P. · 16. lis 2026. · o drugoj verziji
do I need a full cooling container or can I run one at home with a dry cooler
AsicProfit Support AsicProfit · 17. lis 2026.
Bitmain designs it to run with its own hydro cooling infrastructure, but what the miner needs is the flow, pressure, temperature and fluid quality in its spec. A home loop with a pump, dry cooler and plate heat exchanger can meet that if sized for over 5 kW of heat per unit, plus three phase power. Most owners use a hosting site.
Tomas N. · 13. lis 2026. · o drugoj verziji
What coolant, flow and pressure does the XP+ Hyd need?
AsicProfit Support AsicProfit · 14. lis 2026.
Bitmain lists 8 to 10 litres per minute per unit, pressure up to 3.5 bar, inlet coolant 20 to 50°C, and OD10 pipe connectors. Approved fluids are antifreeze (pH 7.0 to 9.0), pure water (6.5 to 7.5) or deionized water (8.5 to 9.5). Use a glycol mix rated for the lowest temperature on site, since frozen and cracked heat exchangers are not covered.
Katarina H. · 11. lis 2026. · o drugoj verziji
Can I plug an S19 XP+ Hyd into normal single phase power?
AsicProfit Support AsicProfit · 11. lis 2026.
No. Bitmain specifies three phase 380 to 415 V, 50 or 60 Hz, up to 12 A per phase, through an APW11 power supply with a waterproof connector. The power cord is not included. Bitmain also requires an earthed supply, a surge protection device and a disconnect that cuts all three phases at once. Plan the electrical work with a qualified electrician.
Daniel F. · 13. ruj 2026. · o drugoj verziji
What is the actual difference between the 279T and 293T versions?
AsicProfit Support AsicProfit · 14. ruj 2026.
They are the same machine in different bins. Bitmain lists 279 TH/s at about 5,301 W and 293 TH/s at about 5,567 W, both around 19 J/TH at 35°C coolant inlet. The 293T makes more hashrate and needs more power and cooling capacity per unit. Compare both in the calculator at your power price.
Prijavite se provjerenim računom da biste postavili pitanje. Prijava
| Model | Hashrate | Snaga | Zarada |
|---|---|---|---|
| Bitmain Antminer S21e Hyd (310Th) | 310 TH/s | $6.73 | |
| Bitmain Antminer S21e Hyd (288Th) | 288 TH/s | $6.25 | |
| Bitmain Antminer S19 XP+ Hyd (293Th) | 293 TH/s | $5.85 | |
| Bitmain Antminer S19 XP+ Hyd (279Th) | 279 TH/s | $5.57 | |
| Bitmain Antminer S19 XP Hyd (257Th) | 257 TH/s | $4.73 | |
| Bitmain Antminer T19 Pro Hyd (235Th) | 235 TH/s | $4.08 |
NMC
QUAI