Bitmain · SHA-256 · Miner BTC
All-in hostingpriser for denne 5,054 W-maskine og den fortjeneste, der er tilbage ved dagens indtjening. Spørg hostingudbyderen, om stedet tager hydro- eller immersionsmaskiner.
Beregneren fra vores gratis widget: hver tilbagebetalingstid på siden bygger på den.
Fortjeneste og tilbagebetaling er estimater ud fra dagens møntkurser og netværkets difficulty, før poolgebyrer, hosting og skat. De ændrer sig hver dag. Ikke finansiel rådgivning.
Sæt denne beregner på dit website →| Periode | Indtægt | Strøm | Fortjeneste |
|---|---|---|---|
| Dag | $9.73 | −$4.42 | $5.31 |
| Uge | $68.09 | −$30.91 | $37.19 |
| Måned | $291.82 | −$132.46 | $159.37 |
| År | $3,550 | −$1,612 | $1,939 |
Indtægt vs. strøm · 121.3 kWh om dagen · ved dagens BTC-pris og sværhedsgrad
Alle mønter, som denne miner kan mine, til dagens priser og sværhedsgrad · $0.0364/kWh
| Mønt | Minet pr. dag | Indtægt / dag | Fortjeneste |
|---|---|---|---|
 PPC |
110 PPC | $33.07 | $28.66 |
 BC2 |
123 BC2 | $12.51 | $8.10 |
 XEC |
1,573,627 XEC | $10.51 | $6.10 |
 BSV |
0.55 BSV | $9.98 | $5.56 |
 BTC Vurderet på |
0.00012 BTC | $9.73 | $5.31 |
 BCH |
0.0315 BCH | $9.12 | $4.70 |
| BCH2 | 318 BCH2 | $7.95 | $3.53 |
 FB |
11.6 FB | $4.22 | −$0.19 |
Ranglisterne bruger algoritmens hovedmønt (BTC for SHA-256, LTC + DOGE for Scrypt): små sidekæder kan betale mere pr. hash i dag, men kan ikke optage ret meget hashrate.
━ Gennemsnitspris ━ Laveste pris
Bitmain Antminer S19 XP+ Hyd (266Th) er en ASIC-miner fra Bitmain til SHA-256-algoritmen med 266 TH/s ved 5,054 W. Den kom på markedet i januar 2025. Dens effektivitet på 19.0 J/TH ligger tæt på medianen af de SHA-256-minere, vi følger (20.4 J/TH). Ved $0.036/kWh er den nr. 94 af 299 SHA-256-minere målt på daglig profit og tjener omkring $5.31 om dagen på BTC. Den bedste pris på AsicProfit er $2,961. Med dagens tal tjener den sig selv hjem på omkring 558 dage. Den er vandkølet (hydro), så den kræver et kølekredsløb og en tørkøler i stedet for blæsere.
Spørg om denne miner. Verificerede konti spørger og svarer, forhandlere svarer som deres butik, og hvert indlæg tjekkes, før det vises.
Oleh B. · 21. okt. 2026 · om en anden version
how often do I have to check the coolant on a hydro miner
AsicProfit Support AsicProfit · 22. okt. 2026
Bitmain's guide puts pH at the centre of routine checks and says coolant below pH 7 should not be used. Test pH roughly every six months, track freezing point and conductivity, and do a full coolant check at least once a year. When draining for repair, empty the miner completely.
Sophie M. · 20. okt. 2026 · om en anden version
Is there warranty on a used S19 XP+ Hyd?
AsicProfit Support AsicProfit · 21. okt. 2026
Bitmain's standard warranty for new S19 and later miners is 365 days from the official shipment date, subject to the sales contract, and is tied to the serial number. A used unit keeps whatever is left of that period. Check the serial on Bitmain's warranty check page before buying. Out of warranty units can still be repaired for a fee.
Milan P. · 16. okt. 2026 · om en anden version
do I need a full cooling container or can I run one at home with a dry cooler
AsicProfit Support AsicProfit · 17. okt. 2026
Bitmain designs it to run with its own hydro cooling infrastructure, but what the miner needs is the flow, pressure, temperature and fluid quality in its spec. A home loop with a pump, dry cooler and plate heat exchanger can meet that if sized for over 5 kW of heat per unit, plus three phase power. Most owners use a hosting site.
Tomas N. · 13. okt. 2026 · om en anden version
What coolant, flow and pressure does the XP+ Hyd need?
AsicProfit Support AsicProfit · 14. okt. 2026
Bitmain lists 8 to 10 litres per minute per unit, pressure up to 3.5 bar, inlet coolant 20 to 50°C, and OD10 pipe connectors. Approved fluids are antifreeze (pH 7.0 to 9.0), pure water (6.5 to 7.5) or deionized water (8.5 to 9.5). Use a glycol mix rated for the lowest temperature on site, since frozen and cracked heat exchangers are not covered.
Katarina H. · 11. okt. 2026 · om en anden version
Can I plug an S19 XP+ Hyd into normal single phase power?
AsicProfit Support AsicProfit · 11. okt. 2026
No. Bitmain specifies three phase 380 to 415 V, 50 or 60 Hz, up to 12 A per phase, through an APW11 power supply with a waterproof connector. The power cord is not included. Bitmain also requires an earthed supply, a surge protection device and a disconnect that cuts all three phases at once. Plan the electrical work with a qualified electrician.
Daniel F. · 13. sep. 2026 · om en anden version
What is the actual difference between the 279T and 293T versions?
AsicProfit Support AsicProfit · 14. sep. 2026
They are the same machine in different bins. Bitmain lists 279 TH/s at about 5,301 W and 293 TH/s at about 5,567 W, both around 19 J/TH at 35°C coolant inlet. The 293T makes more hashrate and needs more power and cooling capacity per unit. Compare both in the calculator at your power price.
Log ind med en verificeret konto for at stille et spørgsmål. Log ind
| Model | Hashrate | Effekt | Fortjeneste |
|---|---|---|---|
| Bitmain Antminer S21e Hyd (310Th) | 310 TH/s | $6.73 | |
| Bitmain Antminer S21e Hyd (288Th) | 288 TH/s | $6.25 | |
| Bitmain Antminer S19 XP+ Hyd (293Th) | 293 TH/s | $5.85 | |
| Bitmain Antminer S19 XP+ Hyd (279Th) | 279 TH/s | $5.57 | |
| Bitmain Antminer S19 XP Hyd (257Th) | 257 TH/s | $4.73 | |
| Bitmain Antminer T19 Pro Hyd (235Th) | 235 TH/s | $4.08 |
NMC
QUAI