Bitmain · SHA-256 · Ťaží BTC
Hostingové sadzby so všetkým pre tento stroj s 5,054 W a zisk, ktorý ostane pri dnešnom výnose. Opýtajte sa hostingu, či lokalita berie stroje s vodným alebo imerzným chladením.
Kalkulačka z nášho bezplatného widgetu: podľa nej sa počíta každá návratnosť na tejto stránke.
Zisk a návratnosť sú odhady z dnešných cien kryptomien a obtiažnosti siete, pred poplatkami poolu, hostingom a daňami. Menia sa každý deň. Nejde o finančné poradenstvo.
Vložte si túto kalkulačku na web →| Obdobie | Výnos | Elektrina | Zisk |
|---|---|---|---|
| Deň | $9.73 | −$4.42 | $5.31 |
| Týždeň | $68.09 | −$30.91 | $37.19 |
| Mesiac | $291.82 | −$132.46 | $159.37 |
| Rok | $3,550 | −$1,612 | $1,939 |
Výnos vs. elektrina · 121.3 kWh denne · pri dnešnej cene a obtiažnosti BTC
Každá kryptomena, ktorú tento miner dokáže ťažiť, pri dnešných cenách a obtiažnosti · $0.0364/kWh
| Kryptomena | Vyťažené za deň | Príjem / deň | Zisk |
|---|---|---|---|
 PPC |
110 PPC | $33.07 | $28.66 |
 BC2 |
123 BC2 | $12.51 | $8.10 |
 XEC |
1,573,627 XEC | $10.51 | $6.10 |
 BSV |
0.55 BSV | $9.98 | $5.56 |
 BTC Hodnotené podľa |
0.00012 BTC | $9.73 | $5.31 |
 BCH |
0.0315 BCH | $9.12 | $4.70 |
| BCH2 | 318 BCH2 | $7.95 | $3.53 |
 FB |
11.6 FB | $4.22 | −$0.19 |
Rebríčky používajú hlavnú kryptomenu algoritmu (BTC pre SHA-256, LTC + DOGE pre Scrypt): malé vedľajšie siete môžu dnes platiť viac za hash, ale veľa hashrate neuniesú.
━ Priemerná cena ━ Najnižšia cena
Bitmain Antminer S19 XP+ Hyd (266Th) je ASIC ťažobný stroj od Bitmain pre algoritmus SHA-256 s výkonom 266 TH/s pri 5,054 W. Uvedený na trh: január 2025. Jeho účinnosť 19.0 J/TH zodpovedá mediánu strojov SHA-256, ktoré sledujeme (20.4 J/TH). Pri $0.036/kWh je na 94. mieste z 299 strojov SHA-256 podľa denného zisku a zarobí zhruba $5.31 denne ťažbou BTC. Najlepšia cena na AsicProfit je $2,961. Pri dnešných hodnotách sa zaplatí zhruba za 558 dní. Je chladený vodou (hydro), takže namiesto ventilátorov potrebuje chladiaci okruh a suchý chladič.
Opýtajte sa na tento miner. Overené účty sa pýtajú a odpovedajú, predajcovia odpovedajú za svoj obchod a každý príspevok pred zverejnením kontrolujeme.
Oleh B. · 21. 10. 2026 · k inej verzii
how often do I have to check the coolant on a hydro miner
AsicProfit Support AsicProfit · 22. 10. 2026
Bitmain's guide puts pH at the centre of routine checks and says coolant below pH 7 should not be used. Test pH roughly every six months, track freezing point and conductivity, and do a full coolant check at least once a year. When draining for repair, empty the miner completely.
Sophie M. · 20. 10. 2026 · k inej verzii
Is there warranty on a used S19 XP+ Hyd?
AsicProfit Support AsicProfit · 21. 10. 2026
Bitmain's standard warranty for new S19 and later miners is 365 days from the official shipment date, subject to the sales contract, and is tied to the serial number. A used unit keeps whatever is left of that period. Check the serial on Bitmain's warranty check page before buying. Out of warranty units can still be repaired for a fee.
Milan P. · 16. 10. 2026 · k inej verzii
do I need a full cooling container or can I run one at home with a dry cooler
AsicProfit Support AsicProfit · 17. 10. 2026
Bitmain designs it to run with its own hydro cooling infrastructure, but what the miner needs is the flow, pressure, temperature and fluid quality in its spec. A home loop with a pump, dry cooler and plate heat exchanger can meet that if sized for over 5 kW of heat per unit, plus three phase power. Most owners use a hosting site.
Tomas N. · 13. 10. 2026 · k inej verzii
What coolant, flow and pressure does the XP+ Hyd need?
AsicProfit Support AsicProfit · 14. 10. 2026
Bitmain lists 8 to 10 litres per minute per unit, pressure up to 3.5 bar, inlet coolant 20 to 50°C, and OD10 pipe connectors. Approved fluids are antifreeze (pH 7.0 to 9.0), pure water (6.5 to 7.5) or deionized water (8.5 to 9.5). Use a glycol mix rated for the lowest temperature on site, since frozen and cracked heat exchangers are not covered.
Katarina H. · 11. 10. 2026 · k inej verzii
Can I plug an S19 XP+ Hyd into normal single phase power?
AsicProfit Support AsicProfit · 11. 10. 2026
No. Bitmain specifies three phase 380 to 415 V, 50 or 60 Hz, up to 12 A per phase, through an APW11 power supply with a waterproof connector. The power cord is not included. Bitmain also requires an earthed supply, a surge protection device and a disconnect that cuts all three phases at once. Plan the electrical work with a qualified electrician.
Daniel F. · 13. 9. 2026 · k inej verzii
What is the actual difference between the 279T and 293T versions?
AsicProfit Support AsicProfit · 14. 9. 2026
They are the same machine in different bins. Bitmain lists 279 TH/s at about 5,301 W and 293 TH/s at about 5,567 W, both around 19 J/TH at 35°C coolant inlet. The 293T makes more hashrate and needs more power and cooling capacity per unit. Compare both in the calculator at your power price.
Na položenie otázky sa prihláste overeným účtom. Prihlásiť sa
| Model | Hashrate | Príkon | Zisk |
|---|---|---|---|
| Bitmain Antminer S21e Hyd (310Th) | 310 TH/s | $6.73 | |
| Bitmain Antminer S21e Hyd (288Th) | 288 TH/s | $6.25 | |
| Bitmain Antminer S19 XP+ Hyd (293Th) | 293 TH/s | $5.85 | |
| Bitmain Antminer S19 XP+ Hyd (279Th) | 279 TH/s | $5.57 | |
| Bitmain Antminer S19 XP Hyd (257Th) | 257 TH/s | $4.73 | |
| Bitmain Antminer T19 Pro Hyd (235Th) | 235 TH/s | $4.08 |
NMC
QUAI