ZC MinerKiemelt✓ Ellenőrzött eladóBitmain Antminer S23 Hyd (580TH) Bitcoin Miner318 TH/s $8,268580 TH/s $15,080Szállítás innen: Hong Kong SAR China · ellenőrizve: 16 órája
Yesmining✓ Ellenőrzött eladóBitmain Antminer S23 Hyd 580T Bitcoin Miner318 TH/s $8,200580 TH/s $13,500442 TH/s $8,999Hosting náluk $0.07/kWh-tól, havi $281Szállítás innen: China · ellenőrizve: épp most
Mindent tartalmazó hosting díjak ehhez a 5,510 W-os géphez, és a mai bevétel mellett megmaradó nyereség. Kérdezze meg a szolgáltatót, hogy a telephely fogad-e hydro vagy merítéses hűtésű gépeket.
Becslés a mai érmeárak és hálózati nehézség alapján, a fenti pooldíj, üzemidő és hoszting után, adózás előtt. Nem pénzügyi tanácsadás.
Nyereség, áramár: $0.0364/kWh
$0.036/kWh áron a(z) Bitmain Antminer S23 Hyd (580Th) napi nyereség alapján a(z) 12. a(z) 299 SHA-256 gép közül, és naponta kb. $11.75 hasznot hoz BTC bányászatával. A legjobb ár az AsicProfiton $12,299. A mai számokkal kb. 1047 nap alatt hozná vissza az árát. Adatok: , 15 percenként frissül.
Időszak
Bevétel
Áram
Nyereség
Nap
$16.56
−$4.81
$11.75
Hét
$115.94
−$33.69
$82.25
Hónap
$496.90
−$144.41
$352.49
Év
$6,046
−$1,757
$4,289
Bevétel és áramköltség · napi 132.2 kWh · a(z) BTC mai árfolyamán és nehézségén
Nyereséges eddig:$0.125/kWhNullszaldós áramár
Nullszaldós BTC-árfolyam$17,72571%-kal a mai ár alatt
Nyereség érménként
Minden érme, amelyet ez a bányagép bányászhat, mai árakon és nehézséggel · $0.0364/kWh
A rangsorok az algoritmus fő érméjét használják (BTC a SHA-256-hoz, LTC + DOGE a Scrypthez): a kis mellékláncok ma többet fizethetnek hashenként, de nem képesek sok hashrate-et befogadni.
A Bitmain Antminer S23 Hyd (580Th) a(z) Bitmain ASIC bányagépe a(z) SHA-256 algoritmusra: 580 TH/s teljesítmény 5,510 W mellett. Megjelenés: 2026. január. 9.5 J/TH értékkel 53%-kal hatékonyabb az általunk követett SHA-256 gépek mediánjánál (20.4 J/TH). $0.036/kWh áron napi nyereség alapján a(z) 12. a(z) 299 SHA-256 gép közül, és naponta kb. $11.75 hasznot hoz BTC bányászatával. A legjobb ár az AsicProfiton $12,299. A mai számokkal kb. 1047 nap alatt hozná vissza az árát. Vízhűtéses (hydro), ezért ventilátorok helyett hűtőkörre és száraz hűtőre van szüksége.
A blokkokat megtaláló poolok
A legnagyobb poolok az eszköz által bányászható érmékhez, az elmúlt 7 nap blokkjaiból való részesedésük szerint.
Kérdezzen erről a bányagépről. Ellenőrzött fiókok kérdeznek és válaszolnak, az eladók a boltjuk nevében válaszolnak, és minden bejegyzést megjelenés előtt ellenőrzünk.
Nguyen M. · 2026. okt. 26. · egy másik verzióról
Can two S23 Hyd units share one water cooler?
AsicProfit SupportAsicProfit · 2026. okt. 26.
Maybe, if the cooler and pump are sized for the combined heat and flow. Each S23 Hyd is rated around 5.5 kW and needs 8 to 10 L/min at its inlet, so two units need double the flow plus pipe losses. Bitmain keeps inlet temperature between 20 and 50 C. Forum owners warn that a cooler rated right at the combined load leaves no margin on hot days. Check the pump curve before you buy.
Andrei P. · 2026. okt. 24. · egy másik verzióról
What's the real difference between the S23 air, Hyd and immersion versions?
AsicProfit SupportAsicProfit · 2026. okt. 24.
They share the S23 chip generation but differ in cooling, power and hashrate. The air version runs on single-phase power with fans and is the easiest to install. The Hyd version uses a closed water loop and three-phase power, and gives the most hashrate per unit. The immersion version runs fanless in dielectric fluid inside a tank. Pick the cooling you can actually provide first, then compare versions in the calculator above.
Ahmed K. · 2026. okt. 7. · egy másik verzióról
my hydro miner won't start in winter even though the water is flowing, why?
AsicProfit SupportAsicProfit · 2026. okt. 9.
Bitmain hydro miners have low-temperature protection and will not start if the inlet coolant is below about 20 C. The S23 Hyd specifies an inlet range of 20 to 50 C. Bitmain suggests warming the loop first, either by recirculating internally until the water heats up or with an inline heater. In freezing climates, use antifreeze coolant rather than pure water so the cold plates are not damaged.
Mehmet Y. · 2026. szept. 29. · egy másik verzióról
Which plug and power does the air-cooled S23 need?
AsicProfit SupportAsicProfit · 2026. szept. 29.
The air-cooled S23 is single-phase: 220 to 277 V, 50 to 60 Hz, up to 20 A. That makes it much easier to install than the Hyd version, which needs three-phase 380 to 415 V. Bitmain rates the air unit at 76 dBA with fans at full speed. It moves a lot of air, so leave at least 10 percent airflow margin in any enclosure or ducting.
Omar H. · 2026. szept. 24. · egy másik verzióról
What warranty does Bitmain give on the S23 series?
AsicProfit SupportAsicProfit · 2026. szept. 26.
Bitmain's shop lists 365 days from the shipping date for the S23 and S23 Hyd. Cover applies only to the original purchaser who bought directly from Bitmain, so resold units are covered by the reseller under its own terms. Bitmain can refuse cover if the unit was run outside its specified conditions. For hydro units, poor coolant or freeze damage are common causes of refused claims.
Carlos M. · 2026. szept. 24. · egy másik verzióról
Is the S23 Hyd something I can run at home, or is it only for big farms?
AsicProfit SupportAsicProfit · 2026. szept. 25.
It is built for commercial setups. The S23 Hyd needs a three-phase 380 to 415 V supply, up to 12 A, and an external water loop with a pump and dry cooler. Coolant must enter between 20 and 50 C at 8 to 10 L/min, under 3.5 bar. Forum owners point out that the cooling gear adds its own power draw. A home install is possible only with three-phase power and a properly sized loop.
Kérdés feltevéséhez jelentkezzen be ellenőrzött fiókkal. Bejelentkezés