Giá thấp nhất thông thường trong 90 ngày: $5,887 – $5,887
OneMinersNổi bật✓ Người bán đã xác minhBảo hành kéo dàiTrả gópCó sẵn, giao nhanhSealMiner A2 Hyd - 446 TH/sHosting tại đây từ $0.0364/kWh, $195 mỗi thángGửi từ United States · kiểm tra 6 giờ trước
PCPrahaNổi bật✓ Người bán đã xác minhSecret easter egg: $50 off, if you digBảo hành kéo dàiCó sẵn, giao nhanhBitdeer SealMiner A2 Hyd 446 TH/s · Skladem u dodavatele / Doma226 TH/s $4,360446 TH/s $7,693Hosting tại đây từ $0.0368/kWh, $198 mỗi thángGửi từ Czechia · kiểm tra 2 giờ trước
✓ Còn hàngMới
$7,693167,199 CZK · 1220 ngày hoàn vốn · $17.25/TH
Yesmining✓ Người bán đã xác minhBitdeer SealMiner A2 Hyd 446Th / s Bitcoin Miner226 TH/s $2,915446 TH/s $6,140Hosting tại đây từ $0.07/kWh, $376 mỗi thángGửi từ China · kiểm tra 14 giờ trước
HSASICMINER✓ Người bán đã xác minhBitdeer SEALMINER A2Hyd 446TH/S 16.5J/TH Bitcoin Miner226 TH/s $2,960446 TH/s $7,086Gửi từ China · kiểm tra 14 giờ trước
Giá hosting trọn gói cho máy 7,360 W này và lợi nhuận còn lại theo thu nhập hôm nay. Hãy hỏi nhà cung cấp xem cơ sở có nhận máy làm mát bằng nước hoặc ngâm dầu không.
NigeriaOneMinersNổi bậtKhí tự nhiên33 MW$0.0364/kWh$195 mỗi tháng+$6.31 / ngàyhoàn vốn sau 934 ngàyXem hosting
Nigeria #2PCPrahaNổi bậtKhí tự nhiên$0.0368/kWh$198 mỗi tháng+$6.24 / ngàyhoàn vốn sau 945 ngàyXem hosting
Ước tính theo giá coin và độ khó mạng hôm nay, sau phí pool, thời gian hoạt động và hosting ở trên, trước thuế. Không phải lời khuyên tài chính.
Lợi nhuận với giá điện $0.0364/kWh
Với giá điện $0.036/kWh, Bitdeer SealMiner A2 Hyd xếp thứ 41 trong 299 máy SHA-256 theo lợi nhuận ngày, kiếm khoảng $6.31 mỗi ngày khi đào BTC. Giá tốt nhất trên AsicProfit là $5,887. Theo số liệu hôm nay, máy sẽ hoàn vốn trong khoảng 934 ngày. Số liệu tính đến , cập nhật mỗi 15 phút.
Khoảng thời gian
Thu nhập
Tiền điện
Lợi nhuận
Ngày
$12.74
−$6.43
$6.31
Tuần
$89.16
−$45.01
$44.15
Tháng
$382.10
−$192.89
$189.20
Năm
$4,649
−$2,347
$2,302
Thu nhập so với tiền điện · 176.6 kWh mỗi ngày · theo giá và độ khó BTC hôm nay
Có lãi đến mức$0.072/kWhGiá điện hòa vốn
Giá BTC hòa vốn$30,789Thấp hơn 50% so với giá hôm nay
Lợi nhuận theo coin
Mọi coin máy này có thể đào, theo giá và độ khó hôm nay · $0.0364/kWh
Bảng xếp hạng dùng coin chính của thuật toán (BTC cho SHA-256, LTC + DOGE cho Scrypt): các chuỗi phụ nhỏ hôm nay có thể trả nhiều hơn trên mỗi hash nhưng không hấp thụ được nhiều hashrate.
Bitdeer SealMiner A2 Hyd là máy đào ASIC của Bitdeer cho thuật toán SHA-256, đạt 446 TH/s với 7,360 W. Máy ra mắt vào tháng 2 năm 2025. Với 16.5 J/TH, máy hiệu quả hơn 19% so với mức trung vị của các máy SHA-256 chúng tôi theo dõi (20.4 J/TH). Với giá điện $0.036/kWh, máy xếp thứ 41 trong 299 máy SHA-256 theo lợi nhuận ngày, kiếm khoảng $6.31 mỗi ngày khi đào BTC. Giá tốt nhất trên AsicProfit là $5,887. Theo số liệu hôm nay, máy sẽ hoàn vốn trong khoảng 934 ngày. Máy làm mát bằng nước (hydro) nên cần vòng làm mát và tháp giải nhiệt khô thay cho quạt.
Các pool tìm ra khối
Các pool lớn nhất cho những coin thiết bị này đào được, theo tỷ lệ khối trong 7 ngày qua.
Hỏi về máy đào này. Tài khoản đã xác minh có thể hỏi và trả lời, người bán trả lời với tư cách cửa hàng, và mọi bài viết đều được kiểm tra trước khi hiển thị.
Mateusz K. · 21 thg 10, 2026 · về phiên bản khác
What's the difference between the SealMiner A2 and the A2 Hydro?
AsicProfit SupportAsicProfit · 21 thg 10, 2026
Bitdeer lists the air-cooled A2 at 226 TH/s and 3,729 W, and the A2 Hydro at up to 446 TH/s and 7,359 W, both at 16.5 J/TH. Efficiency is the same; the Hydro packs about twice the hashrate into a 2U rack unit but needs a water-cooling loop, pumps and a heat rejection system. The later A2 Pro models are a different, more efficient series, so check exactly which one a listing means.
Ivan G. · 19 thg 10, 2026 · về phiên bản khác
What coolant, flow and temperatures does the A2 Hyd need?
AsicProfit SupportAsicProfit · 19 thg 10, 2026
Bitdeer's guide gives a coolant inlet of 20 to 55°C in normal mode and 20 to 45°C in high hash mode, at least 10.2 litres per minute, and inlet pressure no higher than 350 kPa. Use distilled water with corrosion inhibitor and antifreeze, stainless steel piping with no copper, a main filter of at least 100 mesh, a 3.5 bar relief valve and an expansion tank. Purge all air before powering on.
Mehmet Y. · 14 thg 10, 2026 · về phiên bản khác
How do I get an A2 onto my pool? Does it need special software?
AsicProfit SupportAsicProfit · 15 thg 10, 2026
It uses DHCP by default. Bitdeer's Sealminer Tool finds the IP after you hold the IP Report button for about five seconds, then you log in from a browser with the default credentials in the manual and change them. Enter your pool URL and worker name; changes apply without a reboot. The same tool handles batch firmware upgrades and settings if you run several machines.
Sam P. · 10 thg 10, 2026 · về phiên bản khác
my circuit can't take full power, can I cap the A2's wattage?
AsicProfit SupportAsicProfit · 11 thg 10, 2026
Yes. SealMiner firmware has Low Power, Normal and High Performance modes, plus a Custom mode where you set a maximum input power to suit your PDU or circuit. Bitdeer warns that if you set a high target hashrate with too little input power, the machine may throttle or become unstable, so lower both together or simply use the Low Power preset. Normal mode is the factory default.
Mikkel J. · 3 thg 10, 2026 · về phiên bản khác
Can I run the air-cooled A2 in my garage?
AsicProfit SupportAsicProfit · 5 thg 10, 2026
Possibly, if the space suits a farm-class machine. It draws about 3.7 kW, all of which becomes heat that must be exhausted, and it needs a dedicated high-power circuit. Bitdeer advises keeping humidity under 60 percent and cleaning dust every three to six months. Check the input voltage range in the A2 user guide against your supply before buying.
Lukas W. · 16 thg 9, 2026 · về phiên bản khác
What can void the warranty on the hydro version?
AsicProfit SupportAsicProfit · 17 thg 9, 2026
Bitdeer lists, among others: coolant or pipe materials that do not meet spec, a loop without an expansion tank or relief valve leading to overpressure, blockages from a system that was not cleaned properly, and wrong connectors. If a miner is disconnected from the loop, drain it within two hours, and fully drain it before storage or near freezing temperatures. Keep records of your coolant and commissioning.
Đăng nhập bằng tài khoản đã xác minh để đặt câu hỏi. Đăng nhập