Typical lowest price over 90 days: $1,210 – $1,689
OneMiners★ Featured✓ Verified sellerExtended warrantyPay in instalmentsIn stock, fast deliveryAntminer D9 - 1.86 TH/s1.77 TH/s $1,1501.86 TH/s $1,210Host with them from $0.0364/kWh, $79 a monthShips from United States · checked 16 h ago
Estimates from today's coin prices and network difficulty, after the pool fee, uptime and hosting above, before taxes. Not financial advice.
Profit at $0.0364/kWh
At $0.036/kWh the Bitmain Antminer D9 (1860Gh) ranks #1 of 26 X11 miners by daily profit, earning about $2.85 a day mining DASH. The best price on AsicProfit is $1,210. At today's rates it would pay for itself in about 425 days. Figures as of , updated every 15 minutes.
Period
Income
Electricity
Profit
Day
$5.46
−$2.61
$2.85
Week
$38.20
−$18.24
$19.96
Month
$163.71
−$78.18
$85.53
Year
$1,992
−$951.17
$1,041
Income vs electricity · 71.6 kWh a day · at today's DASH price and difficulty
Profitable up to$0.076/kWhBreak-even electricity price
The Bitmain Antminer D9 (1860Gh) is an ASIC miner by Bitmain for the X11 algorithm, rated at 1.86 TH/s on 2,983 W. It came out in February 2023. At 1,603.8 J/TH it is 97% more efficient than the median X11 miner we track (46,428.6 J/TH). At $0.036/kWh it ranks #1 of 26 X11 miners by daily profit, earning about $2.85 a day mining DASH. The best price on AsicProfit is $1,210. At today's rates it would pay for itself in about 425 days. At 75 dB it belongs in a dedicated mining site or hosting facility.
Pools finding the blocks
The biggest pools for the coins this device mines, by their share of the blocks over the last 7 days.
Ask about this miner. Verified accounts ask and answer, sellers answer as their store, and every post is checked before it shows.
Hiroshi S. · Oct 14, 2026 · about another version
Bitmain's page says 1770 MH/s but sellers say 1770 GH/s. Which one is right?
AsicProfit SupportAsicProfit · Oct 15, 2026
The D9 is generally listed at about 1,770 GH/s (1.77 TH/s) on X11, at roughly 2,839 W, which works out to about 1.6 J/GH. The MH/s wording on one official page conflicts with the rest of Bitmain's material and with sellers, so treat it as a units error. Whatever the label, compare it only with other X11 miners, since hashrates across algorithms are not comparable.
Javier O. · Oct 10, 2026 · about another version
is there custom firmware for the D9 like vnish or braiins to tune it?
AsicProfit SupportAsicProfit · Oct 11, 2026
Owners asking on Bitcointalk were told that the usual third-party firmware projects did not support the D9, and that unofficial files found online can carry hidden dev fees or malware. Stick to Bitmain's official firmware for your exact hardware revision, and keep the unit powered for the whole upgrade, because an interrupted flash may need a repair.
Minjun P. · Oct 5, 2026 · about another version
Is the D9 quiet enough for a garage or home office?
AsicProfit SupportAsicProfit · Oct 7, 2026
No for an office, maybe for a garage. It is an air-cooled unit with four high-speed 12038 fans and is listed around 75 dB, comparable to a loud vacuum cleaner running all day. It also puts out the full 2.8 kW as heat. A garage, shed or basement with good ventilation and a fresh air intake works better, and the operating range is roughly 0 to 40 C ambient.
Robert K. · Oct 1, 2026 · about another version
What coin does the Antminer D9 mine? Is it only Dash?
AsicProfit SupportAsicProfit · Oct 2, 2026
The D9 is built for the X11 algorithm, and Dash is the main X11 coin it is used for. Some smaller X11 coins exist, and listing sites name a few, but they have far less liquidity and usually pay less. The hardware cannot switch to other algorithms such as SHA-256 or Scrypt. Check the calculator on this page at your power price to see what X11 earns today.
Pieter V. · Sep 28, 2026 · about another version
D9 power setup: does it need 240V and how many cables? I see two inputs on mine
AsicProfit SupportAsicProfit · Sep 29, 2026
Yes, it needs 200 to 240 V AC. The D9 has two AC inputs, each drawing up to about 10 A, roughly 20 A in total, and both must be connected at the same time for it to run normally. When powering down, switch off both inputs. At around 2,840 W it needs a dedicated circuit sized by an electrician, with a grounded outlet close to the machine.
Omar H. · Sep 15, 2026 · about another version
My D9 throws an overheating error in summer. What temperature is too hot?
AsicProfit SupportAsicProfit · Sep 15, 2026
Bitmain rates it for roughly 0 to 40 C ambient, and the firmware flags an overtemperature error when the outlet air reaches about 95 C. Above 900 m altitude the allowed ambient drops by about 1 C for every 300 m. Clean the fans and heatsinks, make sure hot exhaust is not being pulled back into the intake, and add fresh air or move the unit to a cooler spot during hot months.
Sign in with a verified account to ask a question. Sign in