Typical lowest price over 90 days: $1,482 – $1,598
X-ON MiningFeatured✓ Verified sellerBitmain Antminer S21 Immersion 301Th 5569 W Bitcoin Miner335 TH/s $2,950301 TH/s $3,397Ships from China · checked 16 h ago
Yesmining✓ Verified sellerBitmain Antminer S21 Imm. 215 / 305T / 301T 3440W Bitcoin Miner200 TH/s $1,500335 TH/s $5,662301 TH/s $3,950Host with them from $0.07/kWh, $284 a monthShips from China · checked 12 h ago
Estimates from today's coin prices and network difficulty, after the pool fee, uptime and hosting above, before taxes. Not financial advice.
Profit at $0.0364/kWh
At $0.036/kWh the Bitmain Antminer S21 Immersion (301Th) ranks #82 of 299 SHA-256 miners by daily profit, earning about $3.73 a day mining BTC. The best price on AsicProfit is $1,598. At today's rates it would pay for itself in about 429 days. Figures as of , updated every 15 minutes.
Period
Income
Electricity
Profit
Day
$8.59
−$4.87
$3.73
Week
$60.14
−$34.06
$26.08
Month
$257.72
−$145.95
$111.77
Year
$3,136
−$1,776
$1,360
Income vs electricity · 133.7 kWh a day · at today's BTC price and difficulty
Profitable up to$0.064/kWhBreak-even electricity price
An oil-immersion version of the Bitmain Antminer S21, released in December 2024. This SHA-256 miner for BTC, BCH and BSV runs at 301 TH/s and 5569 W, giving 18.5 J/TH.
Profit by coin
Every coin this miner can mine, at today's prices and difficulty · $0.0364/kWh
Rankings use the algorithm's main coin (BTC for SHA-256, LTC + DOGE for Scrypt): small side chains may pay more per hash today but can't absorb much hashrate.
The Bitmain Antminer S21 Immersion (301Th) is an ASIC miner by Bitmain for the SHA-256 algorithm, rated at 301 TH/s on 5,569 W. It came out in December 2024. Its efficiency of 18.5 J/TH is close to the median SHA-256 miner we track (20.4 J/TH). At $0.036/kWh it ranks #82 of 299 SHA-256 miners by daily profit, earning about $3.73 a day mining BTC. The best price on AsicProfit is $1,598. At today's rates it would pay for itself in about 429 days. It is built for immersion cooling in dielectric fluid.
Pools finding the blocks
The biggest pools for the coins this device mines, by their share of the blocks over the last 7 days.
Ask about this miner. Verified accounts ask and answer, sellers answer as their store, and every post is checked before it shows.
Chen L. · Oct 23, 2026 · about another version
How hot can my garage get before the S21 starts throttling?
AsicProfit SupportAsicProfit · Oct 24, 2026
Bitmain rates the air S21 for 0 to 45°C intake air, higher than the S19 series. In tests, stock firmware ran at full spec at 10 and 20°C and began underclocking near 40°C. Above 900 m altitude the limit drops 1°C per 300 m.
Janis O. · Oct 22, 2026 · about another version
My S21 stops hashing after a few minutes and shows a board error, any ideas?
AsicProfit SupportAsicProfit · Oct 23, 2026
Read the kernel log first. Common causes are a hashboard knocked loose in shipping, a bad data cable or an unstable power supply. One owner fixed this by replacing a faulty supply cable. Reseat cables and test boards one at a time. If it is under Bitmain's 365 day warranty, open a repair ticket rather than opening the case.
Dmitri V. · Oct 20, 2026 · about another version
S21 immersion, what oil temperature and flow does it need?
AsicProfit SupportAsicProfit · Oct 22, 2026
Bitmain lists the S21 Imm at 239 TH/s and 3,824 W in normal mode or 301 TH/s and 5,569 W in high mode, with inlet oil at 30 to 55°C and about 1 cubic metre per hour of coolant flow. It runs on three phase 380 to 415 V. High mode is less efficient.
Felix W. · Oct 3, 2026 · about another version
What does the S21 Hyd need for cooling and power?
AsicProfit SupportAsicProfit · Oct 5, 2026
The S21 Hyd makes about 335 TH/s at 5,360 W on three phase 380 to 415 V. It needs 8 to 10 L/min of deionized or pure water per unit, pressure up to 3.5 bar, pH 8.5 to 9.5, DN10 connectors, and inlet water up to 35°C in normal mode. Replace coolant once conductivity reaches 100 microsiemens per cm.
Oleh B. · Sep 28, 2026 · about another version
what plug does the S21 come with, C19 or C20?
AsicProfit SupportAsicProfit · Sep 29, 2026
Bitmain lists a P33 to P13 or C20 to P13 cord included with the air cooled S21. The P13 end goes into the miner's power supply; the C20 end plugs into a C19 socket on a PDU. Hyd and immersion versions use different power supplies, and the Hyd cord is not included.
Minjun P. · Sep 16, 2026 · about another version
Will an S21 run on a 16A circuit?
AsicProfit SupportAsicProfit · Sep 17, 2026
It is too tight. Bitmain lists about 3,500 W at the wall for the 200 TH/s air S21, on 220 to 277 V with up to 20 A on one input wire. At 230 V that is over 15 A continuously, which leaves no margin on a 16 A breaker. Give it a dedicated 20 A or larger circuit sized by an electrician.
Sign in with a verified account to ask a question. Sign in