Yesmining✓ Verified sellerBITMAIN Antminer S21 188T / 195T / 200T 3500W Bitcoin Miner200 TH/s $1,500335 TH/s $5,662301 TH/s $3,950Host with them from $0.07/kWh, $179 a monthShips from China · checked 14 h ago
Estimates from today's coin prices and network difficulty, after the pool fee, uptime and hosting above, before taxes. Not financial advice.
Profit at $0.0364/kWh
At $0.036/kWh the Bitmain Antminer S21 (200Th) ranks #116 of 299 SHA-256 miners by daily profit, earning about $2.63 a day mining BTC. The best price on AsicProfit is $907. At today's rates it would pay for itself in about 345 days. Figures as of , updated every 15 minutes.
Period
Income
Electricity
Profit
Day
$5.69
−$3.06
$2.63
Week
$39.82
−$21.40
$18.41
Month
$170.64
−$91.73
$78.91
Year
$2,076
−$1,116
$960.05
Income vs electricity · 84.0 kWh a day · at today's BTC price and difficulty
Profitable up to$0.068/kWhBreak-even electricity price
Bitmain's Antminer S21 is an air-cooled SHA-256 miner from the S21 generation, released in February 2024. It mines BTC, BCH and BSV at 200 TH/s and 3500 W, an efficiency of 17.5 J/TH.
Profit by coin
Every coin this miner can mine, at today's prices and difficulty · $0.0364/kWh
Rankings use the algorithm's main coin (BTC for SHA-256, LTC + DOGE for Scrypt): small side chains may pay more per hash today but can't absorb much hashrate.
The Bitmain Antminer S21 (200Th) is an ASIC miner by Bitmain for the SHA-256 algorithm, rated at 200 TH/s on 3,500 W. It came out in February 2024. At 17.5 J/TH it is 14% more efficient than the median SHA-256 miner we track (20.4 J/TH). At $0.036/kWh it ranks #116 of 299 SHA-256 miners by daily profit, earning about $2.63 a day mining BTC. The best price on AsicProfit is $907. At today's rates it would pay for itself in about 345 days. At 75 dB it belongs in a dedicated mining site or hosting facility.
Pools finding the blocks
The biggest pools for the coins this device mines, by their share of the blocks over the last 7 days.
Ask about this miner. Verified accounts ask and answer, sellers answer as their store, and every post is checked before it shows.
Chen L. · Oct 23, 2026
How hot can my garage get before the S21 starts throttling?
AsicProfit SupportAsicProfit · Oct 24, 2026
Bitmain rates the air S21 for 0 to 45°C intake air, higher than the S19 series. In tests, stock firmware ran at full spec at 10 and 20°C and began underclocking near 40°C. Above 900 m altitude the limit drops 1°C per 300 m.
Janis O. · Oct 22, 2026
My S21 stops hashing after a few minutes and shows a board error, any ideas?
AsicProfit SupportAsicProfit · Oct 23, 2026
Read the kernel log first. Common causes are a hashboard knocked loose in shipping, a bad data cable or an unstable power supply. One owner fixed this by replacing a faulty supply cable. Reseat cables and test boards one at a time. If it is under Bitmain's 365 day warranty, open a repair ticket rather than opening the case.
Dmitri V. · Oct 20, 2026
S21 immersion, what oil temperature and flow does it need?
AsicProfit SupportAsicProfit · Oct 22, 2026
Bitmain lists the S21 Imm at 239 TH/s and 3,824 W in normal mode or 301 TH/s and 5,569 W in high mode, with inlet oil at 30 to 55°C and about 1 cubic metre per hour of coolant flow. It runs on three phase 380 to 415 V. High mode is less efficient.
Felix W. · Oct 3, 2026
What does the S21 Hyd need for cooling and power?
AsicProfit SupportAsicProfit · Oct 5, 2026
The S21 Hyd makes about 335 TH/s at 5,360 W on three phase 380 to 415 V. It needs 8 to 10 L/min of deionized or pure water per unit, pressure up to 3.5 bar, pH 8.5 to 9.5, DN10 connectors, and inlet water up to 35°C in normal mode. Replace coolant once conductivity reaches 100 microsiemens per cm.
Oleh B. · Sep 28, 2026
what plug does the S21 come with, C19 or C20?
AsicProfit SupportAsicProfit · Sep 29, 2026
Bitmain lists a P33 to P13 or C20 to P13 cord included with the air cooled S21. The P13 end goes into the miner's power supply; the C20 end plugs into a C19 socket on a PDU. Hyd and immersion versions use different power supplies, and the Hyd cord is not included.
Minjun P. · Sep 16, 2026
Will an S21 run on a 16A circuit?
AsicProfit SupportAsicProfit · Sep 17, 2026
It is too tight. Bitmain lists about 3,500 W at the wall for the 200 TH/s air S21, on 220 to 277 V with up to 20 A on one input wire. At 230 V that is over 15 A continuously, which leaves no margin on a 16 A breaker. Give it a dedicated 20 A or larger circuit sized by an electrician.
Sign in with a verified account to ask a question. Sign in