Typical lowest price over 90 days: $5,887 – $5,887
OneMinersFeatured✓ Verified sellerExtended warrantyPay in instalmentsIn stock, fast deliverySealMiner A2 Hyd - 446 TH/sHost with them from $0.0364/kWh, $195 a monthShips from United States · checked 13 h ago
PCPrahaFeatured✓ Verified sellerSecret easter egg: $50 off, if you digExtended warrantyIn stock, fast deliveryBitdeer SealMiner A2 Hyd 446 TH/s · Skladem u dodavatele / Doma226 TH/s $4,360446 TH/s $7,693Host with them from $0.0368/kWh, $198 a monthShips from Czechia · checked 8 h ago
Yesmining✓ Verified sellerBitdeer SealMiner A2 Hyd 446Th / s Bitcoin Miner226 TH/s $2,915446 TH/s $6,140Host with them from $0.07/kWh, $376 a monthShips from China · checked 4 h ago
Estimates from today's coin prices and network difficulty, after the pool fee, uptime and hosting above, before taxes. Not financial advice.
Profit at $0.0364/kWh
At $0.036/kWh the Bitdeer SealMiner A2 Hyd ranks #41 of 299 SHA-256 miners by daily profit, earning about $6.25 a day mining BTC. The best price on AsicProfit is $5,887. At today's rates it would pay for itself in about 942 days. Figures as of , updated every 15 minutes.
Period
Income
Electricity
Profit
Day
$12.68
−$6.43
$6.25
Week
$88.79
−$45.01
$43.78
Month
$380.52
−$192.89
$187.63
Year
$4,630
−$2,347
$2,283
Income vs electricity · 176.6 kWh a day · at today's BTC price and difficulty
Profitable up to$0.072/kWhBreak-even electricity price
The SealMiner A2 Hyd is Bitdeer's hydro-cooled SHA-256 miner for BTC and BCH, producing 446 TH/s on 7360 W, or 16.5 J/TH. It was released in February 2025.
Profit by coin
Every coin this miner can mine, at today's prices and difficulty · $0.0364/kWh
Rankings use the algorithm's main coin (BTC for SHA-256, LTC + DOGE for Scrypt): small side chains may pay more per hash today but can't absorb much hashrate.
The Bitdeer SealMiner A2 Hyd is an ASIC miner by Bitdeer for the SHA-256 algorithm, rated at 446 TH/s on 7,360 W. It came out in February 2025. At 16.5 J/TH it is 19% more efficient than the median SHA-256 miner we track (20.4 J/TH). At $0.036/kWh it ranks #41 of 299 SHA-256 miners by daily profit, earning about $6.25 a day mining BTC. The best price on AsicProfit is $5,887. At today's rates it would pay for itself in about 942 days. It is water-cooled (hydro), so it needs a cooling loop and a dry cooler instead of fans.
Pools finding the blocks
The biggest pools for the coins this device mines, by their share of the blocks over the last 7 days.
Ask about this miner. Verified accounts ask and answer, sellers answer as their store, and every post is checked before it shows.
Mateusz K. · Oct 21, 2026 · about another version
What's the difference between the SealMiner A2 and the A2 Hydro?
AsicProfit SupportAsicProfit · Oct 21, 2026
Bitdeer lists the air-cooled A2 at 226 TH/s and 3,729 W, and the A2 Hydro at up to 446 TH/s and 7,359 W, both at 16.5 J/TH. Efficiency is the same; the Hydro packs about twice the hashrate into a 2U rack unit but needs a water-cooling loop, pumps and a heat rejection system. The later A2 Pro models are a different, more efficient series, so check exactly which one a listing means.
Ivan G. · Oct 19, 2026 · about another version
What coolant, flow and temperatures does the A2 Hyd need?
AsicProfit SupportAsicProfit · Oct 19, 2026
Bitdeer's guide gives a coolant inlet of 20 to 55°C in normal mode and 20 to 45°C in high hash mode, at least 10.2 litres per minute, and inlet pressure no higher than 350 kPa. Use distilled water with corrosion inhibitor and antifreeze, stainless steel piping with no copper, a main filter of at least 100 mesh, a 3.5 bar relief valve and an expansion tank. Purge all air before powering on.
Mehmet Y. · Oct 14, 2026 · about another version
How do I get an A2 onto my pool? Does it need special software?
AsicProfit SupportAsicProfit · Oct 15, 2026
It uses DHCP by default. Bitdeer's Sealminer Tool finds the IP after you hold the IP Report button for about five seconds, then you log in from a browser with the default credentials in the manual and change them. Enter your pool URL and worker name; changes apply without a reboot. The same tool handles batch firmware upgrades and settings if you run several machines.
Sam P. · Oct 10, 2026 · about another version
my circuit can't take full power, can I cap the A2's wattage?
AsicProfit SupportAsicProfit · Oct 11, 2026
Yes. SealMiner firmware has Low Power, Normal and High Performance modes, plus a Custom mode where you set a maximum input power to suit your PDU or circuit. Bitdeer warns that if you set a high target hashrate with too little input power, the machine may throttle or become unstable, so lower both together or simply use the Low Power preset. Normal mode is the factory default.
Mikkel J. · Oct 3, 2026 · about another version
Can I run the air-cooled A2 in my garage?
AsicProfit SupportAsicProfit · Oct 5, 2026
Possibly, if the space suits a farm-class machine. It draws about 3.7 kW, all of which becomes heat that must be exhausted, and it needs a dedicated high-power circuit. Bitdeer advises keeping humidity under 60 percent and cleaning dust every three to six months. Check the input voltage range in the A2 user guide against your supply before buying.
Lukas W. · Sep 16, 2026 · about another version
What can void the warranty on the hydro version?
AsicProfit SupportAsicProfit · Sep 17, 2026
Bitdeer lists, among others: coolant or pipe materials that do not meet spec, a loop without an expansion tank or relief valve leading to overpressure, blockages from a system that was not cleaned properly, and wrong connectors. If a miner is disconnected from the loop, drain it within two hours, and fully drain it before storage or near freezing temperatures. Keep records of your coolant and commissioning.
Sign in with a verified account to ask a question. Sign in